Supplies Services

Kontaktinformation

Navn, adresse og kontaktpunkter

Danmarks Tekniske Universitet - DTU
Anker Engelunds Vej 1
2800 Kgs. Lyngby DK

Telefon: +45 93510929

Internet adresse

Url: http://www.dtu.dk
E-mail: lisno@dtu.dk

Modtager

Lise Nørhaven

Udbud information

Udbuds Id: 0277-306762
Titel: 7171 - Growth Profiler
Dato for annoncering: 05-09-2022 13:30
Udbudstype: Udbud under tærskelværdierne

Udbudsform: Andre
Anmodningsfrist/tilbudsfrist: 14-09-2022 14:00

Tildelingskriterier: Pris

Kontrakt information

Kontrakt detaljer

Opgavetype: Varer
Beskrivelse af konktrakten:

DTU intend to enter into an agreement with Enzyscreen B.V. for the purchase of a growth profiler. Growth Profiler 960 is a high throughput microbioreactor system designed for simultaneous microbial and/or cell cultivation in a maximum of 10 microtiter plates (24 or 96 well plates) that automatically measures the cell growth. It operates at high oxygen-transfer rates of 30-40 mmol/L, with temperature and humidity controlled, and optionally with the insertion of gases (N2 or oxygen-enriched air). This product is unique in the market.

This system is designed for screening of large number of strains and mutant in different condition of temperature (from 5 degrees below the room temperature up to 40 °C), aeration, and type of sub­strate. It makes the screening process less time consuming by providing growth rate instantly trough image analyses software. Also, it demands small quantities of media. The equipment has a shaking platform with 10 positions for microplates, validated for a shaking fre­quency of 200 -250 rpm at 50 mm of amplitude, equilibrated in both the horizontal and vertical direc­tion with Tungsten counter weights. The measurement set is equipped in two camera boxes that contain 10 individual cameras, memory chips, and an illumination system consisting of arrays of LED lamps and surface mirrors. The equipment comprehends a hollow axis servo-motor of 400 watt (LS Mecapion), two cubic 65 mm right angle gearboxes (ATEK), a temperature control uniUPLC combi­nation (Siemens), a stainless steel (304) groundplate and frame, an incubator unit made of Optiwhite glass and carbon sandwich plate, a stainless steel housing equipped with a 7 inch touchscreen dis­playing the actual temperature and shaking speed, and diagnosis parameters such the torque output of the motor, a desktop computer including the control software connected to PLC and camera sys­tems via ethernet cables. The microtiter plates designed for this equipment are single use made from pure very light grey polystyrene that eliminates unwanted transfer of signals between wells, and trans­parent polystyrene bottom. The cover for the microtiter plates, called sandwich cover, is a specific lid designed for this equipment to prevent contamination and cross-contamination; to permit a reproduc­ible and defined exchange rate of headspace air; to limit the evaporation; to offer a homogenous hydrodynamic condition in each well. The sandwich covers are re-usable and autoclavable composed by a stainless-steel lid for rigidity, a microfiber fiber, an ePTFE filter, a stainless-steel foil with pinholes to control the headspace refreshment rate and evaporation (for type CR1596 and CR1524a products), and a silicone layer with 96 holes for hermetically sealing the microtiter plates. A set of microtiter plates of 48 sterile plates and 10 sandwich covers are included in this acquisition.

The equipment Growth Profiler 960 is a unique product (Patent 86185NL00) and manufactured by Enzyscreen B.V.  
Growth Profiler is a smart solution for shaker-incubator with a high capacity to run simultaneously 10 microtiter plates of 24 or 96 wells. It has high efficiency of oxygen transference and the possibility of anaerobic growth and air enriched with oxygen or carbon dioxide. In addition, it has a low evaporation rate. This equipment allows selecting microbial strains under different stress factors quickly running several conditions simultaneously for media optimization, screening a large number of strains and mutants in different conditions, testing various hosts and vectors, and growth inhibition during micro­organism engineering. Also, this equipment is extended for CHO-cells application. Today Growth Profiler is a unique equipment in the market for high throughput microbioreactor systems that runs up to 960 experiments with automatic measurement of cell growth and instantly gives the growth rate.

Nuts

DK01

Hovedgenstand

38000000

Yderligere genstand(e)

Kontrakt myndighed information

Myndighedstype: Andre

Navn, adresse og kontaktpunkter

Danmarks Tekniske Universitet - DTU
Anker Engelunds Vej 1
2800 Kgs. Lyngby DK

Telefon: +45 45252525

Internet adresse

Url: http://www.dtu.dk
E-mail: dtu@dk.dk

Kontaktperson

Beskrivelse: Lise Nørhaven
Telefon: +45 93510927
E-mail: lisno@dtu.dk

Kontrakt forskellige informationer

Vedhæftede URL-adresser: http://eu.eu-supply.com/ctm/Supplier/PublicPurchase/340494